Splash and Slam Basketball Rim Mounting Hardware

Hardware for Mounting the Rim on the Splash and Slam Backboard 1. Four 5/16 x 1-1/4 Inch Bolts These bolts are used to securely fasten the basketball rim to the backboard. The 5/16-inch diameter ensures a snug fit with the rim's mounting holes, while the 1-1/4 inch length is ideal for passing through the backboard and rim, providing enough thread engagement to maintain a firm hold. These bolts are typically made from high-strength steel to resist the stresses and forces during play. 2. Four 5/16 Inch Lock Nuts The lock nuts feature a nylon insert or metal serrations that prevent loosening over time due to vibrations or impacts. This ensures that the bolts remain securely fastened even during intense use, helping to maintain the stability and safety of the rim and backboard assembly. The 5/16-inch size matches the bolt threads, providing a tight and secure connection. 3. Eight 3/8 Inch Washers These washers distribute the pressure of the bolts evenly across the mounting surface, preventing damage to the backboard and ensuring a more secure and stable attachment. The 3/8-inch size matches the diameter of the bolt, allowing them to fit snugly around the bolt shafts, reducing wear and tear over time. They also help prevent the bolts from pulling through the backboard material under stress. 4. Four 5/16 Inch Rubber Washers The rubber washers serve as a cushion between the metal parts of the mounting hardware, which helps reduce noise, vibration, and the risk of damage to the backboard during play. These washers also provide additional grip to keep the bolts firmly in place and offer a degree of shock absorption. The 5/16-inch rubber washers are sized to match the bolt diameter, providing a tight seal that enhances the durability and performance of the setup. Usage and Installation Notes: - Ensure that the rubber washers are placed between the backboard and the metal mounting components to minimize direct contact between the metal and the backboard surface. - Tighten the bolts securely, but avoid over-tightening, which could damage the backboard or rim. Using a torque wrench is recommended for consistent, optimal tightness. - Periodically check all bolts and nuts to ensure they remain secure, especially after heavy usage or exposure to weather conditions. This set of hardware is designed to provide both strength and durability for mounting the rim on the Splash and Slam backboard, ensuring reliable performance throughout many basketball games.

• Hardware for mounting the Rim on the Splash and Slam Backboard
• Four 5/16 x 1-1/4 Inch Bolts
• Four 5/16 Inch Lock Nuts
• Eight 3/8 Inch Washers
• Four 4/16 Inch Washers